Doing some maintenance/touch up work.
I had two mistakes that needed correction and the finish needed leveled and buffed.
Since I used the shellac as a filler, I knew it would shrink some. I also put the guitar together with the finish really green.
Now that it's had time to cure, I'm sanding the top level to where the filler shrank to. I ntentionally left a thick clear coat to allow for this. I'm interested to see if thinning the finish down has any effect on the toanz.
The mistakes I corrected were the location of the neck pickup and the bridge.
I mounted the bridge 1/16" too far to the bass side and the neck pickup the same distance off from the treble side. The low E was barely over the blade and the low A string was twice as loud as the E.
I filled all the screw holes, tidied up the finish and I'm goin to remount the bridge soon in the correct location.
Also a new CRL switch and new pots. The ones I used are acting up. I probably cooked them when I installed them.